當前位置:首頁 > 產品中心 > 衛生級球閥 > 兩片式球閥 > 304不銹鋼衛生級兩片式球閥316球閥生產廠家
簡要描述:安徽利勒潔凈設備科技有限公司是國內專業生產制造潔凈衛生級閥門管件,主要應用于食品機械行業、制藥機械行業、乳制品行業、釀酒飲料行業以及精細化工等行業高精度衛生級流體設備的專業生產廠家,產品規格齊全;產品主要有:304不銹鋼衛生級兩片式球閥316球閥生產廠家,真空接頭,真空卡箍,真空法蘭,真空管件,真空彎頭,真空三通,真空大小頭,ISO法蘭,KF接頭,真空軟管,真空波紋管等。
產品分類
詳細介紹
一、簡介:
兩片式球閥是一種比較新型的球閥類別,它有著自身結構所*的一些特點:開關無摩擦,密封不易磨損,啟閉力矩小。這樣可減小所配執行器的規格。配以多回轉電動執行機構,可實現對介質的調節和嚴密切斷。廣泛適用于石油、化工、城市給排水等要求嚴格切斷的工況。是靠旋轉閥戀來使閥門暢通或閉塞。兩片式球閥開關輕便,體積小,可以做成很大口徑,密封可靠,結構 簡單,維修方便,密封面與球面常在閉合狀態,不易被介質沖蝕,在各行業得到廣泛的應用。
1. Introduction:
The two-piece ball valve is a relatively new type of ball valve. It has some of the characteristics of its own structure: the switch is frictionless, the seal is not easy to wear, and the opening and closing torque is small. This can reduce the size of the actuator. Equipped with a multi-turn electric actuator, it can realize the adjustment and close shut-off of the medium. It is widely used in working conditions that require strict cut-off such as petroleum, chemical industry, and urban water supply and drainage. It is to make the valve unblocked or blocked by rotating the valve. The two-piece ball valve switch is light, small in size, can be made into a large diameter, reliable in sealing, simple in structure and convenient in maintenance. The sealing surface and the spherical surface are often closed and are not easily eroded by the medium. It is widely used in various industries.
二、特點:
1、流體阻力小,其阻力系數與同長度的管段相等。
2、結構簡單、體積小、重量輕。
3、緊密可靠,目前球閥的密封面材料廣泛使用塑料、密封性好,在真空系統中也已廣泛使用。
4、操作方便,開閉迅速,從全開到全關只要旋轉90°,便于遠距離的控制。
5、維修方便,球閥結構簡單,密封圈一般都是活動的,拆卸更換都比較方便。
6、在全開或全閉時,球體和閥座的密封面與介質隔離,介質通過時,不會引起閥門密封面的侵蝕。
7、適用范圍廣,通徑從小到幾毫米,大到幾米,從高真空至高壓力都可應用。 球旋轉90度時,在進、出口處應全部呈現球面,從而截?cái)嗔鲃?dòng)。
2. Features:
1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.
2. Simple structure, small size and light weight.
3. It is tight and reliable. At present, the sealing surface material of the ball valve is widely used in plastics with good sealing performance, and it has also been widely used in the vacuum system.
4. Convenient operation, rapid opening and closing, only need to rotate 90° from fully open to fully closed, which is convenient for remote control.
5. Convenient maintenance, simple structure of the ball valve, generally movable sealing ring, easy to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes.
7. It has a wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure. When the ball rotates 90 degrees, it should show a spherical surface at the entrance and exit, so as to cut off the flow.
三、結構特點:
1、啟閉無摩擦。這一功能完了傳統閥門因密封面之間相互摩擦而影響密封的問題。
2、上裝式結構。對裝在管道上的閥門可直接在線檢查與維修,能有效減少裝置停車,降低成本。
3、單閥座設計。消除了閥門中腔介質因異常升壓而影響使用安全的問題。
4、低扭矩設計。特殊結構設計的閥桿,只需配一個小手把閥門就能輕松啟閉。
5、楔形密封結構。閥門是靠閥桿提供的機械力,將球楔壓到閥座上而密封,使閥門的密封性不受管線壓差變化的影響,在各種工況下密封性能都有可靠保證。
6、密封面的自清潔結構。當球體傾離閥座時,管線中的流體沿球體密封面成360°均勻通過,不僅消除了高速流體對閥座局部的沖刷,也沖走了密封面上的聚積物,達到自清潔的目的。
3. Structural features:
1. There is no friction when opening and closing. This function eliminates the problem of traditional valves affecting the sealing due to mutual friction between the sealing surfaces.
2. Top-mounted structure. The valve installed on the pipeline can be directly inspected and repaired online, which can effectively reduce device shutdown and reduce costs.
3. Single valve seat design. Eliminates the problem that the medium in the valve cavity affects the safety of use due to abnormal pressure increase.
4. Low torque design. The valve stem with special structure design can easily open and close the valve with only a small handle.
5. Wedge-shaped sealing structure. The valve is sealed by the mechanical force provided by the valve stem to press the ball wedge onto the valve seat, so that the sealing performance of the valve is not affected by the change of pipeline pressure, and the sealing performance is reliably guaranteed under various working conditions.
6. Self-cleaning structure of the sealing surface. When the ball tilts away from the valve seat, the fluid in the pipeline passes through the ball sealing surface at 360° uniformly, which not only eliminates the local washing of the valve seat by the high-speed fluid, but also washes away the accumulation on the sealing surface to achieve the purpose of self-cleaning .
四、主要參數:
連接形式:螺紋
公稱通徑:1/2"~4"
適用介質:水,油,蒸汽,碳酸,硝酸
壓力范圍:1000WOG
啟閉力N:400~500
適用溫度:-40~200(°C)
主體材料:不銹鋼,304.316
設計生產采用:標準, ISO, API, GB, BS等標準設計生產, 其安全性和質量性都經過嚴格處理發放國內外市場
4. Main parameters:
Connection form: thread
Nominal diameter: 1/2"~4"
Applicable medium: water, oil, steam, carbonic acid, nitric acid
Pressure range: 1000WOG
Opening and closing force N: 400~500
Applicable temperature: -40~200 (°C)
Body material: stainless steel, 304.316
Design and production adopt: standard, ISO, API, GB, BS and other standards for design and production, and its safety and quality have been strictly processed and released to domestic and foreign markets
五、實物圖:304不銹鋼衛生級兩片式球閥316球閥生產廠家
公司簡介:
安徽利勒潔凈設備科技有限公司是國內專業生產制造潔凈衛生級閥門管件,主要應用于食品機械行業、制藥機械行業、乳制品行業、釀酒飲料行業以及精細化工等行業高精度衛生級流體設備的專業生產廠家,產品規格齊全;產品主要有:
無菌隔膜閥,卡箍直通隔膜閥,三通隔膜閥,法蘭隔膜閥,氣動隔膜閥,U型隔膜閥,罐底隔膜閥 ;
無菌球閥,卡箍直通球閥,螺紋球閥,焊接球閥,氣動球閥,法蘭球閥,電動球閥;
衛生級蝶閥,焊接蝶閥,卡箍直通蝶閥,螺紋蝶閥,法蘭蝶閥,氣動蝶閥,電動蝶閥;
不銹鋼衛生泵,不銹鋼衛生級離心泵,不銹鋼衛生自吸泵,不銹鋼酒精防爆泵,衛生奶泵,衛生飲料泵;
止回閥,過濾器、呼吸器、換向閥、防混閥、安全閥;304不銹鋼衛生級兩片式球閥316球閥生產廠家
衛生級不銹鋼管件,焊接彎頭,快裝彎頭,不銹鋼三通,快裝三通,四通,真空彎頭,大小頭;
罐頂組件系列,不銹鋼儲罐,發酵罐,不銹鋼衛生級人孔,清洗球/器,視鏡燈,排氣閥等其它非標產品生產加工;
我們竭誠為您服務.
產品咨詢
聯系我們
安徽利勒智能裝備科技有限公司 公司地址:安徽宿州蕭縣高新開發區 技術支持:制藥網掃一掃 更多精彩
微信二維碼
網站二維碼